46 RPM to Radians Per Second Converter
Instant conversion for 46 RPM to rad/s (4.817109 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 4.8171087
- Degrees per Second (°/s)
- 276 °/s
- Hertz (Hz)
- 0.766667 Hz
- Revolutions per Second (RPS)
- 0.766667 rev/s
- Revolutions per Hour (RPH)
- 2,760 rev/hr
- Revolutions per Day
- 66,240 rev/day
- Radians per Minute (rad/min)
- 289.02652 rad/min
- Milliradians per Second (mrad/s)
- 4,817.1087 mrad/s
- Period (seconds per rev)
- 1.304348 s/rev
- Exact Formula
- 46 × π/30 = 4.8171087 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 46 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 46 × (π / 30) = 4.817109 rad/s
Exact fraction: 46π/30 rad/s · Reciprocal: 4.817 rad/s × (30/π) = 46 RPM
Reverse Conversion: 4.817 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
46 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
46 RPM = 23π/15 rad/s ≈ 4.817109 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 4.8162 rad/s instead of the exact 4.8171 rad/s — an error of 0.0009087 rad/s.
What this speed looks like in practice
At 46 RPM a shaft turns about 1.02× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 4.35× faster.
Revolutions over time
That is 2,760 revolutions per hour and 66,240 per day. A quarter turn (90°) takes 326 ms, and the shaft sweeps 0.276° every millisecond.
Rim speed and centripetal load at ω = 4.8171 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.04817 m/s · 0.1734 km/h | 0.232 m/s² · 0.02366 g |
| 5 cm | 10 cm | 0.2409 m/s · 0.8671 km/h | 1.16 m/s² · 0.1183 g |
| 10 cm | 20 cm | 0.4817 m/s · 1.734 km/h | 2.32 m/s² · 0.2366 g |
| 25 cm | 50 cm | 1.204 m/s · 4.335 km/h | 5.801 m/s² · 0.5916 g |
| 50 cm | 1 m | 2.409 m/s · 8.671 km/h | 11.6 m/s² · 1.183 g |
| 1 m | 2 m | 4.817 m/s · 17.34 km/h | 23.2 m/s² · 2.366 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 46 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.7667 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.533 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.3 Hz | Below typical VFD range — use a gearbox |
| 8 | 3.067 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 15.33 RPM · 1.606 rad/s | ×3 |
| 5:1 | 9.2 RPM · 0.9634 rad/s | ×5 |
| 10:1 | 4.6 RPM · 0.4817 rad/s | ×10 |
| 30:1 | 1.533 RPM · 0.1606 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.0116 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.116 J |
| 0.1 kg·m² (car flywheel) | 1.16 J |
| 1 kg·m² (industrial flywheel) | 11.6 J |
Multiples of this speed
- 0.5× = 23 RPM2.4086 rad/s
- 2× = 92 RPM9.6342 rad/s
- 5× = 230 RPM24.0855 rad/s
- 10× = 460 RPM48.1711 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 46 RPM to radians per second, multiply 46 by π and divide by 30: 46 × (π / 30) = 4.817109 rad/s (approx. 4.817 rad/s).
46 RPM equals 0.7667 Hz (revolutions per second), calculated by dividing 46 by 60 seconds.
To convert 4.817 rad/s back to RPM, multiply by 30 and divide by π: 4.817 × (30 / π) ≈ 46 RPM.
At 46 RPM, one full 360° revolution takes 1.3043 seconds (1304.35 ms).
A 4-pole induction motor has a synchronous speed of 46 RPM at 1.5333 Hz (f = RPM × poles / 120 = 46 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 4.817109 rad/s × 0.1 m = 0.4817 m/s (1.7342 km/h). The centripetal acceleration at the rim is ω²·r = 2.3205 m/s².