40 RPM to Radians Per Second Converter
Instant conversion for 40 RPM to rad/s (4.188790 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 4.1887902
- Degrees per Second (°/s)
- 240 °/s
- Hertz (Hz)
- 0.666667 Hz
- Revolutions per Second (RPS)
- 0.666667 rev/s
- Revolutions per Hour (RPH)
- 2,400 rev/hr
- Revolutions per Day
- 57,600 rev/day
- Radians per Minute (rad/min)
- 251.32741 rad/min
- Milliradians per Second (mrad/s)
- 4,188.7902 mrad/s
- Period (seconds per rev)
- 1.5 s/rev
- Exact Formula
- 40 × π/30 = 4.1887902 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 40 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 40 × (π / 30) = 4.188790 rad/s
Exact fraction: 40π/30 rad/s · Reciprocal: 4.189 rad/s × (30/π) = 40 RPM
Reverse Conversion: 4.189 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
40 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
40 RPM = 4π/3 rad/s ≈ 4.18879 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 4.188 rad/s instead of the exact 4.1888 rad/s — an error of 0.0007902 rad/s.
What this speed looks like in practice
At 40 RPM a shaft turns about 1.2× as fast as an LP record (33⅓ RPM). A 7-inch single (45 RPM) turns about 1.13× faster.
Revolutions over time
That is 2,400 revolutions per hour and 57,600 per day. A quarter turn (90°) takes 375 ms, and the shaft sweeps 0.24° every millisecond.
Rim speed and centripetal load at ω = 4.1888 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.04189 m/s · 0.1508 km/h | 0.1755 m/s² · 0.01789 g |
| 5 cm | 10 cm | 0.2094 m/s · 0.754 km/h | 0.8773 m/s² · 0.08946 g |
| 10 cm | 20 cm | 0.4189 m/s · 1.508 km/h | 1.755 m/s² · 0.1789 g |
| 25 cm | 50 cm | 1.047 m/s · 3.77 km/h | 4.386 m/s² · 0.4473 g |
| 50 cm | 1 m | 2.094 m/s · 7.54 km/h | 8.773 m/s² · 0.8946 g |
| 1 m | 2 m | 4.189 m/s · 15.08 km/h | 17.55 m/s² · 1.789 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 40 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.6667 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.333 Hz | Below typical VFD range — use a gearbox |
| 6 | 2 Hz | Below typical VFD range — use a gearbox |
| 8 | 2.667 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 13.33 RPM · 1.396 rad/s | ×3 |
| 5:1 | 8 RPM · 0.8378 rad/s | ×5 |
| 10:1 | 4 RPM · 0.4189 rad/s | ×10 |
| 30:1 | 1.333 RPM · 0.1396 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.008773 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.08773 J |
| 0.1 kg·m² (car flywheel) | 0.8773 J |
| 1 kg·m² (industrial flywheel) | 8.773 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 40 RPM to radians per second, multiply 40 by π and divide by 30: 40 × (π / 30) = 4.188790 rad/s (approx. 4.189 rad/s).
40 RPM equals 0.6667 Hz (revolutions per second), calculated by dividing 40 by 60 seconds.
To convert 4.189 rad/s back to RPM, multiply by 30 and divide by π: 4.189 × (30 / π) ≈ 40 RPM.
At 40 RPM, one full 360° revolution takes 1.5 seconds (1500.00 ms).
A 4-pole induction motor has a synchronous speed of 40 RPM at 1.3333 Hz (f = RPM × poles / 120 = 40 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 4.188790 rad/s × 0.1 m = 0.4189 m/s (1.508 km/h). The centripetal acceleration at the rim is ω²·r = 1.7546 m/s².