38 RPM to Radians Per Second Converter
Instant conversion for 38 RPM to rad/s (3.979351 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 3.9793507
- Degrees per Second (°/s)
- 228 °/s
- Hertz (Hz)
- 0.633333 Hz
- Revolutions per Second (RPS)
- 0.633333 rev/s
- Revolutions per Hour (RPH)
- 2,280 rev/hr
- Revolutions per Day
- 54,720 rev/day
- Radians per Minute (rad/min)
- 238.76104 rad/min
- Milliradians per Second (mrad/s)
- 3,979.3507 mrad/s
- Period (seconds per rev)
- 1.578947 s/rev
- Exact Formula
- 38 × π/30 = 3.9793507 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 38 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 38 × (π / 30) = 3.979351 rad/s
Exact fraction: 38π/30 rad/s · Reciprocal: 3.979 rad/s × (30/π) = 38 RPM
Reverse Conversion: 3.979 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
38 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
38 RPM = 19π/15 rad/s ≈ 3.979351 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 3.9786 rad/s instead of the exact 3.9794 rad/s — an error of 0.0007507 rad/s.
What this speed looks like in practice
At 38 RPM a shaft turns about 1.14× as fast as an LP record (33⅓ RPM). A 7-inch single (45 RPM) turns about 1.18× faster.
Revolutions over time
That is 2,280 revolutions per hour and 54,720 per day. A quarter turn (90°) takes 395 ms, and the shaft sweeps 0.228° every millisecond.
Rim speed and centripetal load at ω = 3.9794 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.03979 m/s · 0.1433 km/h | 0.1584 m/s² · 0.01615 g |
| 5 cm | 10 cm | 0.199 m/s · 0.7163 km/h | 0.7918 m/s² · 0.08074 g |
| 10 cm | 20 cm | 0.3979 m/s · 1.433 km/h | 1.584 m/s² · 0.1615 g |
| 25 cm | 50 cm | 0.9948 m/s · 3.581 km/h | 3.959 m/s² · 0.4037 g |
| 50 cm | 1 m | 1.99 m/s · 7.163 km/h | 7.918 m/s² · 0.8074 g |
| 1 m | 2 m | 3.979 m/s · 14.33 km/h | 15.84 m/s² · 1.615 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 38 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.6333 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.267 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.9 Hz | Below typical VFD range — use a gearbox |
| 8 | 2.533 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 12.67 RPM · 1.326 rad/s | ×3 |
| 5:1 | 7.6 RPM · 0.7959 rad/s | ×5 |
| 10:1 | 3.8 RPM · 0.3979 rad/s | ×10 |
| 30:1 | 1.267 RPM · 0.1326 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.007918 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.07918 J |
| 0.1 kg·m² (car flywheel) | 0.7918 J |
| 1 kg·m² (industrial flywheel) | 7.918 J |
Multiples of this speed
- 0.5× = 19 RPM1.9897 rad/s
- 2× = 76 RPM7.9587 rad/s
- 5× = 190 RPM19.8968 rad/s
- 10× = 380 RPM39.7935 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 38 RPM to radians per second, multiply 38 by π and divide by 30: 38 × (π / 30) = 3.979351 rad/s (approx. 3.979 rad/s).
38 RPM equals 0.6333 Hz (revolutions per second), calculated by dividing 38 by 60 seconds.
To convert 3.979 rad/s back to RPM, multiply by 30 and divide by π: 3.979 × (30 / π) ≈ 38 RPM.
At 38 RPM, one full 360° revolution takes 1.5789 seconds (1578.95 ms).
A 4-pole induction motor has a synchronous speed of 38 RPM at 1.2667 Hz (f = RPM × poles / 120 = 38 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 3.979351 rad/s × 0.1 m = 0.3979 m/s (1.4326 km/h). The centripetal acceleration at the rim is ω²·r = 1.5835 m/s².