39 RPM to Radians Per Second Converter
Instant conversion for 39 RPM to rad/s (4.084070 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 4.0840704
- Degrees per Second (°/s)
- 234 °/s
- Hertz (Hz)
- 0.65 Hz
- Revolutions per Second (RPS)
- 0.65 rev/s
- Revolutions per Hour (RPH)
- 2,340 rev/hr
- Revolutions per Day
- 56,160 rev/day
- Radians per Minute (rad/min)
- 245.04423 rad/min
- Milliradians per Second (mrad/s)
- 4,084.0704 mrad/s
- Period (seconds per rev)
- 1.538462 s/rev
- Exact Formula
- 39 × π/30 = 4.0840704 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 39 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 39 × (π / 30) = 4.084070 rad/s
Exact fraction: 39π/30 rad/s · Reciprocal: 4.084 rad/s × (30/π) = 39 RPM
Reverse Conversion: 4.084 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
39 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
39 RPM = 13π/10 rad/s ≈ 4.08407 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 4.0833 rad/s instead of the exact 4.0841 rad/s — an error of 0.0007704 rad/s.
What this speed looks like in practice
At 39 RPM a shaft turns about 1.17× as fast as an LP record (33⅓ RPM). A 7-inch single (45 RPM) turns about 1.15× faster.
Revolutions over time
That is 2,340 revolutions per hour and 56,160 per day. A quarter turn (90°) takes 385 ms, and the shaft sweeps 0.234° every millisecond.
Rim speed and centripetal load at ω = 4.0841 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.04084 m/s · 0.147 km/h | 0.1668 m/s² · 0.01701 g |
| 5 cm | 10 cm | 0.2042 m/s · 0.7351 km/h | 0.834 m/s² · 0.08504 g |
| 10 cm | 20 cm | 0.4084 m/s · 1.47 km/h | 1.668 m/s² · 0.1701 g |
| 25 cm | 50 cm | 1.021 m/s · 3.676 km/h | 4.17 m/s² · 0.4252 g |
| 50 cm | 1 m | 2.042 m/s · 7.351 km/h | 8.34 m/s² · 0.8504 g |
| 1 m | 2 m | 4.084 m/s · 14.7 km/h | 16.68 m/s² · 1.701 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 39 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.65 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.3 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.95 Hz | Below typical VFD range — use a gearbox |
| 8 | 2.6 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 13 RPM · 1.361 rad/s | ×3 |
| 5:1 | 7.8 RPM · 0.8168 rad/s | ×5 |
| 10:1 | 3.9 RPM · 0.4084 rad/s | ×10 |
| 30:1 | 1.3 RPM · 0.1361 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.00834 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.0834 J |
| 0.1 kg·m² (car flywheel) | 0.834 J |
| 1 kg·m² (industrial flywheel) | 8.34 J |
Multiples of this speed
- 0.5× = 19.5 RPM2.042 rad/s
- 2× = 78 RPM8.1681 rad/s
- 5× = 195 RPM20.4204 rad/s
- 10× = 390 RPM40.8407 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 39 RPM to radians per second, multiply 39 by π and divide by 30: 39 × (π / 30) = 4.084070 rad/s (approx. 4.084 rad/s).
39 RPM equals 0.6500 Hz (revolutions per second), calculated by dividing 39 by 60 seconds.
To convert 4.084 rad/s back to RPM, multiply by 30 and divide by π: 4.084 × (30 / π) ≈ 39 RPM.
At 39 RPM, one full 360° revolution takes 1.5385 seconds (1538.46 ms).
A 4-pole induction motor has a synchronous speed of 39 RPM at 1.3 Hz (f = RPM × poles / 120 = 39 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 4.084070 rad/s × 0.1 m = 0.4084 m/s (1.4703 km/h). The centripetal acceleration at the rim is ω²·r = 1.668 m/s².