20 RPM to Radians Per Second Converter
Instant conversion for 20 RPM to rad/s (2.094395 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 2.0943951
- Degrees per Second (°/s)
- 120 °/s
- Hertz (Hz)
- 0.333333 Hz
- Revolutions per Second (RPS)
- 0.333333 rev/s
- Revolutions per Hour (RPH)
- 1,200 rev/hr
- Revolutions per Day
- 28,800 rev/day
- Radians per Minute (rad/min)
- 125.66371 rad/min
- Milliradians per Second (mrad/s)
- 2,094.3951 mrad/s
- Period (seconds per rev)
- 3 s/rev
- Exact Formula
- 20 × π/30 = 2.0943951 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 20 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 20 × (π / 30) = 2.094395 rad/s
Exact fraction: 20π/30 rad/s · Reciprocal: 2.094 rad/s × (30/π) = 20 RPM
Reverse Conversion: 2.094 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
20 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
20 RPM = 2π/3 rad/s ≈ 2.094395 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 2.094 rad/s instead of the exact 2.0944 rad/s — an error of 0.0003951 rad/s.
What this speed looks like in practice
At 20 RPM a shaft turns about 1.33× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.67× faster.
Revolutions over time
That is 1,200 revolutions per hour and 28,800 per day. A quarter turn (90°) takes 750 ms, and the shaft sweeps 0.12° every millisecond.
Rim speed and centripetal load at ω = 2.0944 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.02094 m/s · 0.0754 km/h | 0.04386 m/s² · 0.004473 g |
| 5 cm | 10 cm | 0.1047 m/s · 0.377 km/h | 0.2193 m/s² · 0.02236 g |
| 10 cm | 20 cm | 0.2094 m/s · 0.754 km/h | 0.4386 m/s² · 0.04473 g |
| 25 cm | 50 cm | 0.5236 m/s · 1.885 km/h | 1.097 m/s² · 0.1118 g |
| 50 cm | 1 m | 1.047 m/s · 3.77 km/h | 2.193 m/s² · 0.2236 g |
| 1 m | 2 m | 2.094 m/s · 7.54 km/h | 4.386 m/s² · 0.4473 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 20 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.3333 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.6667 Hz | Below typical VFD range — use a gearbox |
| 6 | 1 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.333 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 6.667 RPM · 0.6981 rad/s | ×3 |
| 5:1 | 4 RPM · 0.4189 rad/s | ×5 |
| 10:1 | 2 RPM · 0.2094 rad/s | ×10 |
| 30:1 | 0.6667 RPM · 0.06981 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.002193 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.02193 J |
| 0.1 kg·m² (car flywheel) | 0.2193 J |
| 1 kg·m² (industrial flywheel) | 2.193 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 20 RPM to radians per second, multiply 20 by π and divide by 30: 20 × (π / 30) = 2.094395 rad/s (approx. 2.094 rad/s).
20 RPM equals 0.3333 Hz (revolutions per second), calculated by dividing 20 by 60 seconds.
To convert 2.094 rad/s back to RPM, multiply by 30 and divide by π: 2.094 × (30 / π) ≈ 20 RPM.
At 20 RPM, one full 360° revolution takes 3 seconds (3000.00 ms).
A 4-pole induction motor has a synchronous speed of 20 RPM at 0.6667 Hz (f = RPM × poles / 120 = 20 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 2.094395 rad/s × 0.1 m = 0.2094 m/s (0.754 km/h). The centripetal acceleration at the rim is ω²·r = 0.4386 m/s².