RPM to Radians Per SecondRPM to rad/s

33 RPM to Radians Per Second Converter

Instant conversion for 33 RPM to rad/s (3.455752 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result3.455752 rad/s
Radians per Second (rad/s)
3.4557519
Degrees per Second (°/s)
198 °/s
Hertz (Hz)
0.55 Hz
Revolutions per Second (RPS)
0.55 rev/s
Revolutions per Hour (RPH)
1,980 rev/hr
Revolutions per Day
47,520 rev/day
Radians per Minute (rad/min)
207.34512 rad/min
Milliradians per Second (mrad/s)
3,455.7519 mrad/s
Period (seconds per rev)
1.818182 s/rev
Exact Formula
33 × π/30 = 3.4557519 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):3.455752 rad/s
Rounded (0.10472):3.455760 rad/s
Angular Error / Hour:1.67° / hr

Worked Conversion: 33 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 33 × (π / 30) = 3.455752 rad/s

Exact fraction: 33π/30 rad/s · Reciprocal: 3.456 rad/s × (30/π) = 33 RPM

Angular Velocity
3.455752 rad/s
Frequency
0.55 Hz
Degrees / Second
198 °/s
Period per Rev
1.8182 s
Engineering Context: 33 RPM sits at the classic long-play record speed, so this figure shows up constantly in turntable motor and platter-inertia calculations.

Reverse Conversion: 3.456 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

33 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

33 RPM = 11π/10 rad/s ≈ 3.455752 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 3.4551 rad/s instead of the exact 3.4558 rad/s — an error of 0.0006519 rad/s.

What this speed looks like in practice

At 33 RPM a shaft turns about 2.2× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.01× faster.

Revolutions over time

That is 1,980 revolutions per hour and 47,520 per day. A quarter turn (90°) takes 455 ms, and the shaft sweeps 0.198° every millisecond.

Rim speed and centripetal load at ω = 3.4558 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.03456 m/s · 0.1244 km/h0.1194 m/s² · 0.01218 g
5 cm10 cm0.1728 m/s · 0.622 km/h0.5971 m/s² · 0.06089 g
10 cm20 cm0.3456 m/s · 1.244 km/h1.194 m/s² · 0.1218 g
25 cm50 cm0.8639 m/s · 3.11 km/h2.986 m/s² · 0.3044 g
50 cm1 m1.728 m/s · 6.22 km/h5.971 m/s² · 0.6089 g
1 m2 m3.456 m/s · 12.44 km/h11.94 m/s² · 1.218 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 33 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.55 HzBelow typical VFD range — use a gearbox
41.1 HzBelow typical VFD range — use a gearbox
61.65 HzBelow typical VFD range — use a gearbox
82.2 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:111 RPM · 1.152 rad/s×3
5:16.6 RPM · 0.6912 rad/s×5
10:13.3 RPM · 0.3456 rad/s×10
30:11.1 RPM · 0.1152 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.005971 J
0.01 kg·m² (bench-grinder wheel)0.05971 J
0.1 kg·m² (car flywheel)0.5971 J
1 kg·m² (industrial flywheel)5.971 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions