RPM to Radians Per SecondRPM to rad/s

31.416 Rad/s to RPM Converter

Instant conversion for 31.416 rad/s to RPM (299.9997 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result299.99975 RPM
RPM
299.99975
Degrees per Second (°/s)
1,799.9985 °/s
Hertz (Hz)
4.999996 Hz
Revolutions per Second (RPS)
4.999996 rev/s
Revolutions per Hour (RPH)
17,999.985 rev/hr
Revolutions per Day
431,999.64 rev/day
Radians per Minute (rad/min)
1,884.954 rad/min
Milliradians per Second (mrad/s)
31,415.9 mrad/s
Period (seconds per rev)
0.2 s/rev
Exact Formula
31.4159 × 30/π = 299.99975 RPM
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):31.415900 rad/s
Rounded (0.10472):31.415973 rad/s
Angular Error / Hour:15.15° / hr

Worked Conversion: 31.416 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 31.4159 × (30 / π) = 299.9997 RPM

Exact fraction: (31.4159 × 30)/π RPM · Reciprocal: 300 RPM × (π/30) = 31.416 rad/s

Rotational Speed
299.9997 RPM
Frequency
5 Hz
Degrees / Second
1,800 °/s
Period per Rev
0.2 s
Engineering Context: At 31.416 rad/s (ten-pi radians per second harmonic), 10π rad/s equals 300 RPM exactly (5.0 Hz rotational frequency), a common benchmark for industrial reciprocating compressors.

Forward Conversion: 300 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 300 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

31.4159 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

31.4159 rad/s = 942.477/π RPM ≈ 299.999747 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 300.0218 RPM instead of the exact 299.9997 RPM — an error of 0.0221 RPM.

What this speed looks like in practice

At 299.9997 RPM a shaft turns about 1.5× as fast as a ceiling fan on high. A car engine at idle turns about 2.5× faster.

Revolutions over time

That is 18,000 revolutions per hour and 432,000 per day. A quarter turn (90°) takes 50 ms, and the shaft sweeps 1.8° every millisecond.

Rim speed and centripetal load at ω = 31.4159 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.3142 m/s · 1.131 km/h9.87 m/s² · 1.006 g
5 cm10 cm1.571 m/s · 5.655 km/h49.35 m/s² · 5.032 g
10 cm20 cm3.142 m/s · 11.31 km/h98.7 m/s² · 10.06 g
25 cm50 cm7.854 m/s · 28.27 km/h246.7 m/s² · 25.16 g
50 cm1 m15.71 m/s · 56.55 km/h493.5 m/s² · 50.32 g
1 m2 m31.42 m/s · 113.1 km/h987 m/s² · 100.6 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 300 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
25 HzBelow typical VFD range — use a gearbox
410 HzReachable with a VFD
615 HzReachable with a VFD
820 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1100 RPM · 10.47 rad/s×3
5:160 RPM · 6.283 rad/s×5
10:130 RPM · 3.142 rad/s×10
30:110 RPM · 1.047 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.4935 J
0.01 kg·m² (bench-grinder wheel)4.935 J
0.1 kg·m² (car flywheel)49.35 J
1 kg·m² (industrial flywheel)493.5 J

Multiples of this speed

  • 0.5× = 15.708 rad/s149.9999 RPM
  • 2× = 62.8318 rad/s599.9995 RPM
  • 5× = 157.0795 rad/s1,499.9987 RPM
  • 10× = 314.159 rad/s2,999.9975 RPM
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions