RPM to Radians Per SecondRPM to rad/s

18 RPM to Radians Per Second Converter

Instant conversion for 18 RPM to rad/s (1.884956 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result1.884956 rad/s
Radians per Second (rad/s)
1.8849556
Degrees per Second (°/s)
108 °/s
Hertz (Hz)
0.3 Hz
Revolutions per Second (RPS)
0.3 rev/s
Revolutions per Hour (RPH)
1,080 rev/hr
Revolutions per Day
25,920 rev/day
Radians per Minute (rad/min)
113.09734 rad/min
Milliradians per Second (mrad/s)
1,884.9556 mrad/s
Period (seconds per rev)
3.333333 s/rev
Exact Formula
18 × π/30 = 1.8849556 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):1.884956 rad/s
Rounded (0.10472):1.884960 rad/s
Angular Error / Hour:0.91° / hr

Worked Conversion: 18 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 18 × (π / 30) = 1.884956 rad/s

Exact fraction: 18π/30 rad/s · Reciprocal: 1.885 rad/s × (30/π) = 18 RPM

Angular Velocity
1.884956 rad/s
Frequency
0.3 Hz
Degrees / Second
108 °/s
Period per Rev
3.3333 s
Engineering Context: Speeds in the low tens of RPM belong to rotisseries, concrete mixers and slow display turntables — high-torque, low-speed drives.

Reverse Conversion: 1.885 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

18 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

18 RPM = 3π/5 rad/s ≈ 1.884956 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 1.8846 rad/s instead of the exact 1.885 rad/s — an error of 0.0003556 rad/s.

What this speed looks like in practice

At 18 RPM a shaft turns about 1.2× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.85× faster.

Revolutions over time

That is 1,080 revolutions per hour and 25,920 per day. A quarter turn (90°) takes 833 ms, and the shaft sweeps 0.108° every millisecond.

Rim speed and centripetal load at ω = 1.885 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.01885 m/s · 0.06786 km/h0.03553 m/s² · 0.003623 g
5 cm10 cm0.09425 m/s · 0.3393 km/h0.1777 m/s² · 0.01812 g
10 cm20 cm0.1885 m/s · 0.6786 km/h0.3553 m/s² · 0.03623 g
25 cm50 cm0.4712 m/s · 1.696 km/h0.8883 m/s² · 0.09058 g
50 cm1 m0.9425 m/s · 3.393 km/h1.777 m/s² · 0.1812 g
1 m2 m1.885 m/s · 6.786 km/h3.553 m/s² · 0.3623 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 18 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.3 HzBelow typical VFD range — use a gearbox
40.6 HzBelow typical VFD range — use a gearbox
60.9 HzBelow typical VFD range — use a gearbox
81.2 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:16 RPM · 0.6283 rad/s×3
5:13.6 RPM · 0.377 rad/s×5
10:11.8 RPM · 0.1885 rad/s×10
30:10.6 RPM · 0.06283 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.001777 J
0.01 kg·m² (bench-grinder wheel)0.01777 J
0.1 kg·m² (car flywheel)0.1777 J
1 kg·m² (industrial flywheel)1.777 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions