17 RPM to Radians Per Second Converter
Instant conversion for 17 RPM to rad/s (1.780236 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 1.7802358
- Degrees per Second (°/s)
- 102 °/s
- Hertz (Hz)
- 0.283333 Hz
- Revolutions per Second (RPS)
- 0.283333 rev/s
- Revolutions per Hour (RPH)
- 1,020 rev/hr
- Revolutions per Day
- 24,480 rev/day
- Radians per Minute (rad/min)
- 106.81415 rad/min
- Milliradians per Second (mrad/s)
- 1,780.2358 mrad/s
- Period (seconds per rev)
- 3.529412 s/rev
- Exact Formula
- 17 × π/30 = 1.7802358 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 17 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 17 × (π / 30) = 1.780236 rad/s
Exact fraction: 17π/30 rad/s · Reciprocal: 1.78 rad/s × (30/π) = 17 RPM
Reverse Conversion: 1.78 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
17 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
17 RPM = 17π/30 rad/s ≈ 1.780236 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 1.7799 rad/s instead of the exact 1.7802 rad/s — an error of 0.0003358 rad/s.
What this speed looks like in practice
At 17 RPM a shaft turns about 1.13× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.96× faster.
Revolutions over time
That is 1,020 revolutions per hour and 24,480 per day. A quarter turn (90°) takes 882 ms, and the shaft sweeps 0.102° every millisecond.
Rim speed and centripetal load at ω = 1.7802 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.0178 m/s · 0.06409 km/h | 0.03169 m/s² · 0.003232 g |
| 5 cm | 10 cm | 0.08901 m/s · 0.3204 km/h | 0.1585 m/s² · 0.01616 g |
| 10 cm | 20 cm | 0.178 m/s · 0.6409 km/h | 0.3169 m/s² · 0.03232 g |
| 25 cm | 50 cm | 0.4451 m/s · 1.602 km/h | 0.7923 m/s² · 0.08079 g |
| 50 cm | 1 m | 0.8901 m/s · 3.204 km/h | 1.585 m/s² · 0.1616 g |
| 1 m | 2 m | 1.78 m/s · 6.409 km/h | 3.169 m/s² · 0.3232 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 17 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.2833 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.5667 Hz | Below typical VFD range — use a gearbox |
| 6 | 0.85 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.133 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 5.667 RPM · 0.5934 rad/s | ×3 |
| 5:1 | 3.4 RPM · 0.356 rad/s | ×5 |
| 10:1 | 1.7 RPM · 0.178 rad/s | ×10 |
| 30:1 | 0.5667 RPM · 0.05934 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.001585 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.01585 J |
| 0.1 kg·m² (car flywheel) | 0.1585 J |
| 1 kg·m² (industrial flywheel) | 1.585 J |
Multiples of this speed
- 0.5× = 8.5 RPM0.8901 rad/s
- 2× = 34 RPM3.5605 rad/s
- 5× = 85 RPM8.9012 rad/s
- 10× = 170 RPM17.8024 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 17 RPM to radians per second, multiply 17 by π and divide by 30: 17 × (π / 30) = 1.780236 rad/s (approx. 1.78 rad/s).
17 RPM equals 0.2833 Hz (revolutions per second), calculated by dividing 17 by 60 seconds.
To convert 1.78 rad/s back to RPM, multiply by 30 and divide by π: 1.78 × (30 / π) ≈ 17 RPM.
At 17 RPM, one full 360° revolution takes 3.5294 seconds (3529.41 ms).
A 4-pole induction motor has a synchronous speed of 17 RPM at 0.5667 Hz (f = RPM × poles / 120 = 17 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 1.780236 rad/s × 0.1 m = 0.178 m/s (0.6409 km/h). The centripetal acceleration at the rim is ω²·r = 0.3169 m/s².