RPM to Radians Per SecondRPM to rad/s

170 RPM to Radians Per Second Converter

Instant conversion for 170 RPM to rad/s (17.802358 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result17.802358 rad/s
Radians per Second (rad/s)
17.802358
Degrees per Second (°/s)
1,020 °/s
Hertz (Hz)
2.833333 Hz
Revolutions per Second (RPS)
2.833333 rev/s
Revolutions per Hour (RPH)
10,200 rev/hr
Revolutions per Day
244,800 rev/day
Radians per Minute (rad/min)
1,068.1415 rad/min
Milliradians per Second (mrad/s)
17,802.358 mrad/s
Period (seconds per rev)
0.352941 s/rev
Exact Formula
170 × π/30 = 17.802358 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):17.802358 rad/s
Rounded (0.10472):17.802400 rad/s
Angular Error / Hour:8.59° / hr

Worked Conversion: 170 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 170 × (π / 30) = 17.802358 rad/s

Exact fraction: 170π/30 rad/s · Reciprocal: 17.802 rad/s × (30/π) = 170 RPM

Angular Velocity
17.802358 rad/s
Frequency
2.8333 Hz
Degrees / Second
1,020 °/s
Period per Rev
0.3529 s
Engineering Context: A few hundred RPM covers ceiling fans, washing-machine wash cycles and geared conveyor drives — fast enough to feel, slow enough to watch.

Reverse Conversion: 17.802 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

170 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

170 RPM = 17π/3 rad/s ≈ 17.802358 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 17.799 rad/s instead of the exact 17.8024 rad/s — an error of 0.003358 rad/s.

What this speed looks like in practice

At 170 RPM a shaft turns about 3.78× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.18× faster.

Revolutions over time

That is 10,200 revolutions per hour and 244,800 per day. A quarter turn (90°) takes 88.2 ms, and the shaft sweeps 1.02° every millisecond.

Rim speed and centripetal load at ω = 17.8024 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.178 m/s · 0.6409 km/h3.169 m/s² · 0.3232 g
5 cm10 cm0.8901 m/s · 3.204 km/h15.85 m/s² · 1.616 g
10 cm20 cm1.78 m/s · 6.409 km/h31.69 m/s² · 3.232 g
25 cm50 cm4.451 m/s · 16.02 km/h79.23 m/s² · 8.079 g
50 cm1 m8.901 m/s · 32.04 km/h158.5 m/s² · 16.16 g
1 m2 m17.8 m/s · 64.09 km/h316.9 m/s² · 32.32 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 170 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
22.833 HzBelow typical VFD range — use a gearbox
45.667 HzReachable with a VFD
68.5 HzReachable with a VFD
811.33 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:156.67 RPM · 5.934 rad/s×3
5:134 RPM · 3.56 rad/s×5
10:117 RPM · 1.78 rad/s×10
30:15.667 RPM · 0.5934 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.1585 J
0.01 kg·m² (bench-grinder wheel)1.585 J
0.1 kg·m² (car flywheel)15.85 J
1 kg·m² (industrial flywheel)158.5 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions