159 RPM to Radians Per Second Converter
Instant conversion for 159 RPM to rad/s (16.650441 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 16.650441
- Degrees per Second (°/s)
- 954 °/s
- Hertz (Hz)
- 2.65 Hz
- Revolutions per Second (RPS)
- 2.65 rev/s
- Revolutions per Hour (RPH)
- 9,540 rev/hr
- Revolutions per Day
- 228,960 rev/day
- Radians per Minute (rad/min)
- 999.02646 rad/min
- Milliradians per Second (mrad/s)
- 16,650.441 mrad/s
- Period (seconds per rev)
- 0.377358 s/rev
- Exact Formula
- 159 × π/30 = 16.650441 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 159 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 159 × (π / 30) = 16.650441 rad/s
Exact fraction: 159π/30 rad/s · Reciprocal: 16.65 rad/s × (30/π) = 159 RPM
Reverse Conversion: 16.65 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
159 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
159 RPM = 53π/10 rad/s ≈ 16.650441 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 16.6473 rad/s instead of the exact 16.6504 rad/s — an error of 0.003141 rad/s.
What this speed looks like in practice
At 159 RPM a shaft turns about 3.53× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.26× faster.
Revolutions over time
That is 9,540 revolutions per hour and 228,960 per day. A quarter turn (90°) takes 94.3 ms, and the shaft sweeps 0.954° every millisecond.
Rim speed and centripetal load at ω = 16.6504 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.1665 m/s · 0.5994 km/h | 2.772 m/s² · 0.2827 g |
| 5 cm | 10 cm | 0.8325 m/s · 2.997 km/h | 13.86 m/s² · 1.414 g |
| 10 cm | 20 cm | 1.665 m/s · 5.994 km/h | 27.72 m/s² · 2.827 g |
| 25 cm | 50 cm | 4.163 m/s · 14.99 km/h | 69.31 m/s² · 7.068 g |
| 50 cm | 1 m | 8.325 m/s · 29.97 km/h | 138.6 m/s² · 14.14 g |
| 1 m | 2 m | 16.65 m/s · 59.94 km/h | 277.2 m/s² · 28.27 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 159 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 2.65 Hz | Below typical VFD range — use a gearbox |
| 4 | 5.3 Hz | Reachable with a VFD |
| 6 | 7.95 Hz | Reachable with a VFD |
| 8 | 10.6 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 53 RPM · 5.55 rad/s | ×3 |
| 5:1 | 31.8 RPM · 3.33 rad/s | ×5 |
| 10:1 | 15.9 RPM · 1.665 rad/s | ×10 |
| 30:1 | 5.3 RPM · 0.555 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.1386 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.386 J |
| 0.1 kg·m² (car flywheel) | 13.86 J |
| 1 kg·m² (industrial flywheel) | 138.6 J |
Multiples of this speed
- 0.5× = 79.5 RPM8.3252 rad/s
- 2× = 318 RPM33.3009 rad/s
- 5× = 795 RPM83.2522 rad/s
- 10× = 1,590 RPM166.5044 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 159 RPM to radians per second, multiply 159 by π and divide by 30: 159 × (π / 30) = 16.650441 rad/s (approx. 16.65 rad/s).
159 RPM equals 2.6500 Hz (revolutions per second), calculated by dividing 159 by 60 seconds.
To convert 16.65 rad/s back to RPM, multiply by 30 and divide by π: 16.65 × (30 / π) ≈ 159 RPM.
At 159 RPM, one full 360° revolution takes 0.3774 seconds (377.36 ms).
A 4-pole induction motor has a synchronous speed of 159 RPM at 5.3 Hz (f = RPM × poles / 120 = 159 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 16.650441 rad/s × 0.1 m = 1.665 m/s (5.9942 km/h). The centripetal acceleration at the rim is ω²·r = 27.7237 m/s².