140 RPM to Radians Per Second Converter
Instant conversion for 140 RPM to rad/s (14.660766 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 14.660766
- Degrees per Second (°/s)
- 840 °/s
- Hertz (Hz)
- 2.333333 Hz
- Revolutions per Second (RPS)
- 2.333333 rev/s
- Revolutions per Hour (RPH)
- 8,400 rev/hr
- Revolutions per Day
- 201,600 rev/day
- Radians per Minute (rad/min)
- 879.64594 rad/min
- Milliradians per Second (mrad/s)
- 14,660.766 mrad/s
- Period (seconds per rev)
- 0.428571 s/rev
- Exact Formula
- 140 × π/30 = 14.660766 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 140 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 140 × (π / 30) = 14.660766 rad/s
Exact fraction: 140π/30 rad/s · Reciprocal: 14.661 rad/s × (30/π) = 140 RPM
Reverse Conversion: 14.661 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
140 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
140 RPM = 14π/3 rad/s ≈ 14.660766 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 14.658 rad/s instead of the exact 14.6608 rad/s — an error of 0.002766 rad/s.
What this speed looks like in practice
At 140 RPM a shaft turns about 3.11× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.43× faster.
Revolutions over time
That is 8,400 revolutions per hour and 201,600 per day. A quarter turn (90°) takes 107 ms, and the shaft sweeps 0.84° every millisecond.
Rim speed and centripetal load at ω = 14.6608 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.1466 m/s · 0.5278 km/h | 2.149 m/s² · 0.2192 g |
| 5 cm | 10 cm | 0.733 m/s · 2.639 km/h | 10.75 m/s² · 1.096 g |
| 10 cm | 20 cm | 1.466 m/s · 5.278 km/h | 21.49 m/s² · 2.192 g |
| 25 cm | 50 cm | 3.665 m/s · 13.19 km/h | 53.73 m/s² · 5.479 g |
| 50 cm | 1 m | 7.33 m/s · 26.39 km/h | 107.5 m/s² · 10.96 g |
| 1 m | 2 m | 14.66 m/s · 52.78 km/h | 214.9 m/s² · 21.92 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 140 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 2.333 Hz | Below typical VFD range — use a gearbox |
| 4 | 4.667 Hz | Below typical VFD range — use a gearbox |
| 6 | 7 Hz | Reachable with a VFD |
| 8 | 9.333 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 46.67 RPM · 4.887 rad/s | ×3 |
| 5:1 | 28 RPM · 2.932 rad/s | ×5 |
| 10:1 | 14 RPM · 1.466 rad/s | ×10 |
| 30:1 | 4.667 RPM · 0.4887 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.1075 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.075 J |
| 0.1 kg·m² (car flywheel) | 10.75 J |
| 1 kg·m² (industrial flywheel) | 107.5 J |
Multiples of this speed
- 0.5× = 70 RPM7.3304 rad/s
- 2× = 280 RPM29.3215 rad/s
- 5× = 700 RPM73.3038 rad/s
- 10× = 1,400 RPM146.6077 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 140 RPM to radians per second, multiply 140 by π and divide by 30: 140 × (π / 30) = 14.660766 rad/s (approx. 14.661 rad/s).
140 RPM equals 2.3333 Hz (revolutions per second), calculated by dividing 140 by 60 seconds.
To convert 14.661 rad/s back to RPM, multiply by 30 and divide by π: 14.661 × (30 / π) ≈ 140 RPM.
At 140 RPM, one full 360° revolution takes 0.4286 seconds (428.57 ms).
A 4-pole induction motor has a synchronous speed of 140 RPM at 4.6667 Hz (f = RPM × poles / 120 = 140 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 14.660766 rad/s × 0.1 m = 1.4661 m/s (5.2779 km/h). The centripetal acceleration at the rim is ω²·r = 21.4938 m/s².