RPM to Radians Per SecondRPM to rad/s

14 RPM to Radians Per Second Converter

Instant conversion for 14 RPM to rad/s (1.466077 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result1.466077 rad/s
Radians per Second (rad/s)
1.4660766
Degrees per Second (°/s)
84 °/s
Hertz (Hz)
0.233333 Hz
Revolutions per Second (RPS)
0.233333 rev/s
Revolutions per Hour (RPH)
840 rev/hr
Revolutions per Day
20,160 rev/day
Radians per Minute (rad/min)
87.964594 rad/min
Milliradians per Second (mrad/s)
1,466.0766 mrad/s
Period (seconds per rev)
4.285714 s/rev
Exact Formula
14 × π/30 = 1.4660766 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):1.466077 rad/s
Rounded (0.10472):1.466080 rad/s
Angular Error / Hour:0.71° / hr

Worked Conversion: 14 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 14 × (π / 30) = 1.466077 rad/s

Exact fraction: 14π/30 rad/s · Reciprocal: 1.466 rad/s × (30/π) = 14 RPM

Angular Velocity
1.466077 rad/s
Frequency
0.2333 Hz
Degrees / Second
84 °/s
Period per Rev
4.2857 s
Engineering Context: Speeds in the low tens of RPM belong to rotisseries, concrete mixers and slow display turntables — high-torque, low-speed drives.

Reverse Conversion: 1.466 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

14 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

14 RPM = 7π/15 rad/s ≈ 1.466077 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 1.4658 rad/s instead of the exact 1.4661 rad/s — an error of 0.0002766 rad/s.

What this speed looks like in practice

At 14 RPM a shaft turns about 14× as fast as a clock's second hand. A utility-scale wind turbine rotor turns about 1.07× faster.

Revolutions over time

That is 840 revolutions per hour and 20,160 per day. A quarter turn (90°) takes 1.07 s, and the shaft sweeps 0.084° every millisecond.

Rim speed and centripetal load at ω = 1.4661 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.01466 m/s · 0.05278 km/h0.02149 m/s² · 0.002192 g
5 cm10 cm0.0733 m/s · 0.2639 km/h0.1075 m/s² · 0.01096 g
10 cm20 cm0.1466 m/s · 0.5278 km/h0.2149 m/s² · 0.02192 g
25 cm50 cm0.3665 m/s · 1.319 km/h0.5373 m/s² · 0.05479 g
50 cm1 m0.733 m/s · 2.639 km/h1.075 m/s² · 0.1096 g
1 m2 m1.466 m/s · 5.278 km/h2.149 m/s² · 0.2192 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 14 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.2333 HzBelow typical VFD range — use a gearbox
40.4667 HzBelow typical VFD range — use a gearbox
60.7 HzBelow typical VFD range — use a gearbox
80.9333 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:14.667 RPM · 0.4887 rad/s×3
5:12.8 RPM · 0.2932 rad/s×5
10:11.4 RPM · 0.1466 rad/s×10
30:10.4667 RPM · 0.04887 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.001075 J
0.01 kg·m² (bench-grinder wheel)0.01075 J
0.1 kg·m² (car flywheel)0.1075 J
1 kg·m² (industrial flywheel)1.075 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions