RPM to Radians Per SecondRPM to rad/s

130 RPM to Radians Per Second Converter

Instant conversion for 130 RPM to rad/s (13.613568 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result13.613568 rad/s
Radians per Second (rad/s)
13.613568
Degrees per Second (°/s)
780 °/s
Hertz (Hz)
2.166667 Hz
Revolutions per Second (RPS)
2.166667 rev/s
Revolutions per Hour (RPH)
7,800 rev/hr
Revolutions per Day
187,200 rev/day
Radians per Minute (rad/min)
816.81409 rad/min
Milliradians per Second (mrad/s)
13,613.568 mrad/s
Period (seconds per rev)
0.461538 s/rev
Exact Formula
130 × π/30 = 13.613568 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):13.613568 rad/s
Rounded (0.10472):13.613600 rad/s
Angular Error / Hour:6.57° / hr

Worked Conversion: 130 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 130 × (π / 30) = 13.613568 rad/s

Exact fraction: 130π/30 rad/s · Reciprocal: 13.614 rad/s × (30/π) = 130 RPM

Angular Velocity
13.613568 rad/s
Frequency
2.1667 Hz
Degrees / Second
780 °/s
Period per Rev
0.4615 s
Engineering Context: A few hundred RPM covers ceiling fans, washing-machine wash cycles and geared conveyor drives — fast enough to feel, slow enough to watch.

Reverse Conversion: 13.614 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

130 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

130 RPM = 13π/3 rad/s ≈ 13.613568 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 13.611 rad/s instead of the exact 13.6136 rad/s — an error of 0.002568 rad/s.

What this speed looks like in practice

At 130 RPM a shaft turns about 2.89× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.54× faster.

Revolutions over time

That is 7,800 revolutions per hour and 187,200 per day. A quarter turn (90°) takes 115 ms, and the shaft sweeps 0.78° every millisecond.

Rim speed and centripetal load at ω = 13.6136 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.1361 m/s · 0.4901 km/h1.853 m/s² · 0.189 g
5 cm10 cm0.6807 m/s · 2.45 km/h9.266 m/s² · 0.9449 g
10 cm20 cm1.361 m/s · 4.901 km/h18.53 m/s² · 1.89 g
25 cm50 cm3.403 m/s · 12.25 km/h46.33 m/s² · 4.725 g
50 cm1 m6.807 m/s · 24.5 km/h92.66 m/s² · 9.449 g
1 m2 m13.61 m/s · 49.01 km/h185.3 m/s² · 18.9 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 130 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
22.167 HzBelow typical VFD range — use a gearbox
44.333 HzBelow typical VFD range — use a gearbox
66.5 HzReachable with a VFD
88.667 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:143.33 RPM · 4.538 rad/s×3
5:126 RPM · 2.723 rad/s×5
10:113 RPM · 1.361 rad/s×10
30:14.333 RPM · 0.4538 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.09266 J
0.01 kg·m² (bench-grinder wheel)0.9266 J
0.1 kg·m² (car flywheel)9.266 J
1 kg·m² (industrial flywheel)92.66 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions