12 RPM to Radians Per Second Converter
Instant conversion for 12 RPM to rad/s (1.256637 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 1.2566371
- Degrees per Second (°/s)
- 72 °/s
- Hertz (Hz)
- 0.2 Hz
- Revolutions per Second (RPS)
- 0.2 rev/s
- Revolutions per Hour (RPH)
- 720 rev/hr
- Revolutions per Day
- 17,280 rev/day
- Radians per Minute (rad/min)
- 75.398224 rad/min
- Milliradians per Second (mrad/s)
- 1,256.6371 mrad/s
- Period (seconds per rev)
- 5 s/rev
- Exact Formula
- 12 × π/30 = 1.2566371 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 12 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 12 × (π / 30) = 1.256637 rad/s
Exact fraction: 12π/30 rad/s · Reciprocal: 1.257 rad/s × (30/π) = 12 RPM
Reverse Conversion: 1.257 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
12 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
12 RPM = 2π/5 rad/s ≈ 1.256637 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 1.2564 rad/s instead of the exact 1.2566 rad/s — an error of 0.0002371 rad/s.
What this speed looks like in practice
At 12 RPM a shaft turns about 12× as fast as a clock's second hand. A utility-scale wind turbine rotor turns about 1.25× faster.
Revolutions over time
That is 720 revolutions per hour and 17,280 per day. A quarter turn (90°) takes 1.25 s, and the shaft sweeps 0.072° every millisecond.
Rim speed and centripetal load at ω = 1.2566 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.01257 m/s · 0.04524 km/h | 0.01579 m/s² · 0.00161 g |
| 5 cm | 10 cm | 0.06283 m/s · 0.2262 km/h | 0.07896 m/s² · 0.008051 g |
| 10 cm | 20 cm | 0.1257 m/s · 0.4524 km/h | 0.1579 m/s² · 0.0161 g |
| 25 cm | 50 cm | 0.3142 m/s · 1.131 km/h | 0.3948 m/s² · 0.04026 g |
| 50 cm | 1 m | 0.6283 m/s · 2.262 km/h | 0.7896 m/s² · 0.08051 g |
| 1 m | 2 m | 1.257 m/s · 4.524 km/h | 1.579 m/s² · 0.161 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 12 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.2 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.4 Hz | Below typical VFD range — use a gearbox |
| 6 | 0.6 Hz | Below typical VFD range — use a gearbox |
| 8 | 0.8 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 4 RPM · 0.4189 rad/s | ×3 |
| 5:1 | 2.4 RPM · 0.2513 rad/s | ×5 |
| 10:1 | 1.2 RPM · 0.1257 rad/s | ×10 |
| 30:1 | 0.4 RPM · 0.04189 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.0007896 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.007896 J |
| 0.1 kg·m² (car flywheel) | 0.07896 J |
| 1 kg·m² (industrial flywheel) | 0.7896 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 12 RPM to radians per second, multiply 12 by π and divide by 30: 12 × (π / 30) = 1.256637 rad/s (approx. 1.257 rad/s).
12 RPM equals 0.2000 Hz (revolutions per second), calculated by dividing 12 by 60 seconds.
To convert 1.257 rad/s back to RPM, multiply by 30 and divide by π: 1.257 × (30 / π) ≈ 12 RPM.
At 12 RPM, one full 360° revolution takes 5 seconds (5000.00 ms).
A 4-pole induction motor has a synchronous speed of 12 RPM at 0.4 Hz (f = RPM × poles / 120 = 12 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 1.256637 rad/s × 0.1 m = 0.1257 m/s (0.4524 km/h). The centripetal acceleration at the rim is ω²·r = 0.1579 m/s².