RPM to Radians Per SecondRPM to rad/s

71 RPM to Radians Per Second Converter

Instant conversion for 71 RPM to rad/s (7.435103 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result7.435103 rad/s
Radians per Second (rad/s)
7.4351026
Degrees per Second (°/s)
426 °/s
Hertz (Hz)
1.183333 Hz
Revolutions per Second (RPS)
1.183333 rev/s
Revolutions per Hour (RPH)
4,260 rev/hr
Revolutions per Day
102,240 rev/day
Radians per Minute (rad/min)
446.10616 rad/min
Milliradians per Second (mrad/s)
7,435.1026 mrad/s
Period (seconds per rev)
0.84507 s/rev
Exact Formula
71 × π/30 = 7.4351026 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):7.435103 rad/s
Rounded (0.10472):7.435120 rad/s
Angular Error / Hour:3.59° / hr

Worked Conversion: 71 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 71 × (π / 30) = 7.435103 rad/s

Exact fraction: 71π/30 rad/s · Reciprocal: 7.435 rad/s × (30/π) = 71 RPM

Angular Velocity
7.435103 rad/s
Frequency
1.1833 Hz
Degrees / Second
426 °/s
Period per Rev
0.8451 s
Engineering Context: Under 100 RPM you are around one revolution per second, the range of bicycle wheels at low speed, slow ceiling fans and hand-cranked machinery.

Reverse Conversion: 7.435 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

71 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

71 RPM = 71π/30 rad/s ≈ 7.435103 rad/s

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 7.4337 rad/s instead of the exact 7.4351 rad/s — an error of 0.001403 rad/s.

What this speed looks like in practice

At 71 RPM a shaft turns about 1.58× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.82× faster.

Revolutions over time

That is 4,260 revolutions per hour and 102,240 per day. A quarter turn (90°) takes 211 ms, and the shaft sweeps 0.426° every millisecond.

Rim speed and centripetal load at ω = 7.4351 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.07435 m/s · 0.2677 km/h0.5528 m/s² · 0.05637 g
5 cm10 cm0.3718 m/s · 1.338 km/h2.764 m/s² · 0.2819 g
10 cm20 cm0.7435 m/s · 2.677 km/h5.528 m/s² · 0.5637 g
25 cm50 cm1.859 m/s · 6.692 km/h13.82 m/s² · 1.409 g
50 cm1 m3.718 m/s · 13.38 km/h27.64 m/s² · 2.819 g
1 m2 m7.435 m/s · 26.77 km/h55.28 m/s² · 5.637 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 71 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.183 HzBelow typical VFD range — use a gearbox
42.367 HzBelow typical VFD range — use a gearbox
63.55 HzBelow typical VFD range — use a gearbox
84.733 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:123.67 RPM · 2.478 rad/s×3
5:114.2 RPM · 1.487 rad/s×5
10:17.1 RPM · 0.7435 rad/s×10
30:12.367 RPM · 0.2478 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.02764 J
0.01 kg·m² (bench-grinder wheel)0.2764 J
0.1 kg·m² (car flywheel)2.764 J
1 kg·m² (industrial flywheel)27.64 J

Multiples of this speed

  • 0.5× = 35.5 RPM3.7176 rad/s
  • 2× = 142 RPM14.8702 rad/s
  • 5× = 355 RPM37.1755 rad/s
  • 10× = 710 RPM74.351 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions