73 RPM to Radians Per Second Converter
Instant conversion for 73 RPM to rad/s (7.644542 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 7.6445421
- Degrees per Second (°/s)
- 438 °/s
- Hertz (Hz)
- 1.216667 Hz
- Revolutions per Second (RPS)
- 1.216667 rev/s
- Revolutions per Hour (RPH)
- 4,380 rev/hr
- Revolutions per Day
- 105,120 rev/day
- Radians per Minute (rad/min)
- 458.67253 rad/min
- Milliradians per Second (mrad/s)
- 7,644.5421 mrad/s
- Period (seconds per rev)
- 0.821918 s/rev
- Exact Formula
- 73 × π/30 = 7.6445421 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 73 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 73 × (π / 30) = 7.644542 rad/s
Exact fraction: 73π/30 rad/s · Reciprocal: 7.645 rad/s × (30/π) = 73 RPM
Reverse Conversion: 7.645 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
73 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
73 RPM = 73π/30 rad/s ≈ 7.644542 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 7.6431 rad/s instead of the exact 7.6445 rad/s — an error of 0.001442 rad/s.
What this speed looks like in practice
At 73 RPM a shaft turns about 1.62× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.74× faster.
Revolutions over time
That is 4,380 revolutions per hour and 105,120 per day. A quarter turn (90°) takes 205 ms, and the shaft sweeps 0.438° every millisecond.
Rim speed and centripetal load at ω = 7.6445 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.07645 m/s · 0.2752 km/h | 0.5844 m/s² · 0.05959 g |
| 5 cm | 10 cm | 0.3822 m/s · 1.376 km/h | 2.922 m/s² · 0.298 g |
| 10 cm | 20 cm | 0.7645 m/s · 2.752 km/h | 5.844 m/s² · 0.5959 g |
| 25 cm | 50 cm | 1.911 m/s · 6.88 km/h | 14.61 m/s² · 1.49 g |
| 50 cm | 1 m | 3.822 m/s · 13.76 km/h | 29.22 m/s² · 2.98 g |
| 1 m | 2 m | 7.645 m/s · 27.52 km/h | 58.44 m/s² · 5.959 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 73 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.217 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.433 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.65 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.867 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 24.33 RPM · 2.548 rad/s | ×3 |
| 5:1 | 14.6 RPM · 1.529 rad/s | ×5 |
| 10:1 | 7.3 RPM · 0.7645 rad/s | ×10 |
| 30:1 | 2.433 RPM · 0.2548 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.02922 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.2922 J |
| 0.1 kg·m² (car flywheel) | 2.922 J |
| 1 kg·m² (industrial flywheel) | 29.22 J |
Multiples of this speed
- 0.5× = 36.5 RPM3.8223 rad/s
- 2× = 146 RPM15.2891 rad/s
- 5× = 365 RPM38.2227 rad/s
- 10× = 730 RPM76.4454 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 73 RPM to radians per second, multiply 73 by π and divide by 30: 73 × (π / 30) = 7.644542 rad/s (approx. 7.645 rad/s).
73 RPM equals 1.2167 Hz (revolutions per second), calculated by dividing 73 by 60 seconds.
To convert 7.645 rad/s back to RPM, multiply by 30 and divide by π: 7.645 × (30 / π) ≈ 73 RPM.
At 73 RPM, one full 360° revolution takes 0.8219 seconds (821.92 ms).
A 4-pole induction motor has a synchronous speed of 73 RPM at 2.4333 Hz (f = RPM × poles / 120 = 73 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 7.644542 rad/s × 0.1 m = 0.7645 m/s (2.752 km/h). The centripetal acceleration at the rim is ω²·r = 5.8439 m/s².