69 RPM to Radians Per Second Converter
Instant conversion for 69 RPM to rad/s (7.225663 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 7.2256631
- Degrees per Second (°/s)
- 414 °/s
- Hertz (Hz)
- 1.15 Hz
- Revolutions per Second (RPS)
- 1.15 rev/s
- Revolutions per Hour (RPH)
- 4,140 rev/hr
- Revolutions per Day
- 99,360 rev/day
- Radians per Minute (rad/min)
- 433.53979 rad/min
- Milliradians per Second (mrad/s)
- 7,225.6631 mrad/s
- Period (seconds per rev)
- 0.869565 s/rev
- Exact Formula
- 69 × π/30 = 7.2256631 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 69 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 69 × (π / 30) = 7.225663 rad/s
Exact fraction: 69π/30 rad/s · Reciprocal: 7.226 rad/s × (30/π) = 69 RPM
Reverse Conversion: 7.226 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
69 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
69 RPM = 23π/10 rad/s ≈ 7.225663 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 7.2243 rad/s instead of the exact 7.2257 rad/s — an error of 0.001363 rad/s.
What this speed looks like in practice
At 69 RPM a shaft turns about 1.53× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.9× faster.
Revolutions over time
That is 4,140 revolutions per hour and 99,360 per day. A quarter turn (90°) takes 217 ms, and the shaft sweeps 0.414° every millisecond.
Rim speed and centripetal load at ω = 7.2257 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.07226 m/s · 0.2601 km/h | 0.5221 m/s² · 0.05324 g |
| 5 cm | 10 cm | 0.3613 m/s · 1.301 km/h | 2.611 m/s² · 0.2662 g |
| 10 cm | 20 cm | 0.7226 m/s · 2.601 km/h | 5.221 m/s² · 0.5324 g |
| 25 cm | 50 cm | 1.806 m/s · 6.503 km/h | 13.05 m/s² · 1.331 g |
| 50 cm | 1 m | 3.613 m/s · 13.01 km/h | 26.11 m/s² · 2.662 g |
| 1 m | 2 m | 7.226 m/s · 26.01 km/h | 52.21 m/s² · 5.324 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 69 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.15 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.3 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.45 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.6 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 23 RPM · 2.409 rad/s | ×3 |
| 5:1 | 13.8 RPM · 1.445 rad/s | ×5 |
| 10:1 | 6.9 RPM · 0.7226 rad/s | ×10 |
| 30:1 | 2.3 RPM · 0.2409 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.02611 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.2611 J |
| 0.1 kg·m² (car flywheel) | 2.611 J |
| 1 kg·m² (industrial flywheel) | 26.11 J |
Multiples of this speed
- 0.5× = 34.5 RPM3.6128 rad/s
- 2× = 138 RPM14.4513 rad/s
- 5× = 345 RPM36.1283 rad/s
- 10× = 690 RPM72.2566 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 69 RPM to radians per second, multiply 69 by π and divide by 30: 69 × (π / 30) = 7.225663 rad/s (approx. 7.226 rad/s).
69 RPM equals 1.1500 Hz (revolutions per second), calculated by dividing 69 by 60 seconds.
To convert 7.226 rad/s back to RPM, multiply by 30 and divide by π: 7.226 × (30 / π) ≈ 69 RPM.
At 69 RPM, one full 360° revolution takes 0.8696 seconds (869.57 ms).
A 4-pole induction motor has a synchronous speed of 69 RPM at 2.3 Hz (f = RPM × poles / 120 = 69 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 7.225663 rad/s × 0.1 m = 0.7226 m/s (2.6012 km/h). The centripetal acceleration at the rim is ω²·r = 5.221 m/s².