RPM to Radians Per SecondRPM to rad/s

67 RPM to Radians Per Second Converter

Instant conversion for 67 RPM to rad/s (7.016224 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result7.016224 rad/s
Radians per Second (rad/s)
7.0162236
Degrees per Second (°/s)
402 °/s
Hertz (Hz)
1.116667 Hz
Revolutions per Second (RPS)
1.116667 rev/s
Revolutions per Hour (RPH)
4,020 rev/hr
Revolutions per Day
96,480 rev/day
Radians per Minute (rad/min)
420.97342 rad/min
Milliradians per Second (mrad/s)
7,016.2236 mrad/s
Period (seconds per rev)
0.895522 s/rev
Exact Formula
67 × π/30 = 7.0162236 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):7.016224 rad/s
Rounded (0.10472):7.016240 rad/s
Angular Error / Hour:3.38° / hr

Worked Conversion: 67 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 67 × (π / 30) = 7.016224 rad/s

Exact fraction: 67π/30 rad/s · Reciprocal: 7.016 rad/s × (30/π) = 67 RPM

Angular Velocity
7.016224 rad/s
Frequency
1.1167 Hz
Degrees / Second
402 °/s
Period per Rev
0.8955 s
Engineering Context: Under 100 RPM you are around one revolution per second, the range of bicycle wheels at low speed, slow ceiling fans and hand-cranked machinery.

Reverse Conversion: 7.016 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

67 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

67 RPM = 67π/30 rad/s ≈ 7.016224 rad/s

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 7.0149 rad/s instead of the exact 7.0162 rad/s — an error of 0.001324 rad/s.

What this speed looks like in practice

At 67 RPM a shaft turns about 1.49× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.99× faster.

Revolutions over time

That is 4,020 revolutions per hour and 96,480 per day. A quarter turn (90°) takes 224 ms, and the shaft sweeps 0.402° every millisecond.

Rim speed and centripetal load at ω = 7.0162 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.07016 m/s · 0.2526 km/h0.4923 m/s² · 0.0502 g
5 cm10 cm0.3508 m/s · 1.263 km/h2.461 m/s² · 0.251 g
10 cm20 cm0.7016 m/s · 2.526 km/h4.923 m/s² · 0.502 g
25 cm50 cm1.754 m/s · 6.315 km/h12.31 m/s² · 1.255 g
50 cm1 m3.508 m/s · 12.63 km/h24.61 m/s² · 2.51 g
1 m2 m7.016 m/s · 25.26 km/h49.23 m/s² · 5.02 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 67 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.117 HzBelow typical VFD range — use a gearbox
42.233 HzBelow typical VFD range — use a gearbox
63.35 HzBelow typical VFD range — use a gearbox
84.467 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:122.33 RPM · 2.339 rad/s×3
5:113.4 RPM · 1.403 rad/s×5
10:16.7 RPM · 0.7016 rad/s×10
30:12.233 RPM · 0.2339 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.02461 J
0.01 kg·m² (bench-grinder wheel)0.2461 J
0.1 kg·m² (car flywheel)2.461 J
1 kg·m² (industrial flywheel)24.61 J

Multiples of this speed

  • 0.5× = 33.5 RPM3.5081 rad/s
  • 2× = 134 RPM14.0324 rad/s
  • 5× = 335 RPM35.0811 rad/s
  • 10× = 670 RPM70.1622 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions