68 RPM to Radians Per Second Converter
Instant conversion for 68 RPM to rad/s (7.120943 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 7.1209433
- Degrees per Second (°/s)
- 408 °/s
- Hertz (Hz)
- 1.133333 Hz
- Revolutions per Second (RPS)
- 1.133333 rev/s
- Revolutions per Hour (RPH)
- 4,080 rev/hr
- Revolutions per Day
- 97,920 rev/day
- Radians per Minute (rad/min)
- 427.2566 rad/min
- Milliradians per Second (mrad/s)
- 7,120.9433 mrad/s
- Period (seconds per rev)
- 0.882353 s/rev
- Exact Formula
- 68 × π/30 = 7.1209433 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 68 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 68 × (π / 30) = 7.120943 rad/s
Exact fraction: 68π/30 rad/s · Reciprocal: 7.121 rad/s × (30/π) = 68 RPM
Reverse Conversion: 7.121 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
68 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
68 RPM = 34π/15 rad/s ≈ 7.120943 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 7.1196 rad/s instead of the exact 7.1209 rad/s — an error of 0.001343 rad/s.
What this speed looks like in practice
At 68 RPM a shaft turns about 1.51× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.94× faster.
Revolutions over time
That is 4,080 revolutions per hour and 97,920 per day. A quarter turn (90°) takes 221 ms, and the shaft sweeps 0.408° every millisecond.
Rim speed and centripetal load at ω = 7.1209 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.07121 m/s · 0.2564 km/h | 0.5071 m/s² · 0.05171 g |
| 5 cm | 10 cm | 0.356 m/s · 1.282 km/h | 2.535 m/s² · 0.2585 g |
| 10 cm | 20 cm | 0.7121 m/s · 2.564 km/h | 5.071 m/s² · 0.5171 g |
| 25 cm | 50 cm | 1.78 m/s · 6.409 km/h | 12.68 m/s² · 1.293 g |
| 50 cm | 1 m | 3.56 m/s · 12.82 km/h | 25.35 m/s² · 2.585 g |
| 1 m | 2 m | 7.121 m/s · 25.64 km/h | 50.71 m/s² · 5.171 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 68 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.133 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.267 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.4 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.533 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 22.67 RPM · 2.374 rad/s | ×3 |
| 5:1 | 13.6 RPM · 1.424 rad/s | ×5 |
| 10:1 | 6.8 RPM · 0.7121 rad/s | ×10 |
| 30:1 | 2.267 RPM · 0.2374 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.02535 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.2535 J |
| 0.1 kg·m² (car flywheel) | 2.535 J |
| 1 kg·m² (industrial flywheel) | 25.35 J |
Multiples of this speed
- 0.5× = 34 RPM3.5605 rad/s
- 2× = 136 RPM14.2419 rad/s
- 5× = 340 RPM35.6047 rad/s
- 10× = 680 RPM71.2094 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 68 RPM to radians per second, multiply 68 by π and divide by 30: 68 × (π / 30) = 7.120943 rad/s (approx. 7.121 rad/s).
68 RPM equals 1.1333 Hz (revolutions per second), calculated by dividing 68 by 60 seconds.
To convert 7.121 rad/s back to RPM, multiply by 30 and divide by π: 7.121 × (30 / π) ≈ 68 RPM.
At 68 RPM, one full 360° revolution takes 0.8824 seconds (882.35 ms).
A 4-pole induction motor has a synchronous speed of 68 RPM at 2.2667 Hz (f = RPM × poles / 120 = 68 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 7.120943 rad/s × 0.1 m = 0.7121 m/s (2.5635 km/h). The centripetal acceleration at the rim is ω²·r = 5.0708 m/s².