RPM to Radians Per SecondRPM to rad/s

2,500 RPM to Radians Per Second Converter

Instant conversion for 2,500 RPM to rad/s (261.799388 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result261.799388 rad/s
Radians per Second (rad/s)
261.79939
Degrees per Second (°/s)
15,000 °/s
Hertz (Hz)
41.666667 Hz
Revolutions per Second (RPS)
41.666667 rev/s
Revolutions per Hour (RPH)
150,000 rev/hr
Revolutions per Day
3,600,000 rev/day
Radians per Minute (rad/min)
15,707.963 rad/min
Milliradians per Second (mrad/s)
261,799.39 mrad/s
Period (seconds per rev)
0.024 s/rev
Exact Formula
2500 × π/30 = 261.79939 rad/s
Nearest Real-World Example
Car engine — highway (2,500 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):261.799388 rad/s
Rounded (0.10472):261.800000 rad/s
Angular Error / Hour:126.28° / hr

Worked Conversion: 2,500 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 2500 × (π / 30) = 261.799388 rad/s

Exact fraction: 2500π/30 rad/s · Reciprocal: 261.8 rad/s × (30/π) = 2,500 RPM

Angular Velocity
261.799388 rad/s
Frequency
41.6667 Hz
Degrees / Second
15,000 °/s
Period per Rev
0.024 s
Engineering Context: One to two-and-a-half thousand RPM is the industrial motor and cruising-engine band, so nameplate speeds and gearbox ratios cluster here.

Reverse Conversion: 261.8 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

2,500 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

2,500 RPM = 250π/3 rad/s ≈ 261.799388 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 261.75 rad/s instead of the exact 261.7994 rad/s — an error of 0.04939 rad/s.

What this speed looks like in practice

At 2,500 RPM a shaft turns about 1.39× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 2.16× faster.

Revolutions over time

That is 150,000 revolutions per hour and 3,600,000 per day. A quarter turn (90°) takes 6 ms, and the shaft sweeps 15° every millisecond.

Rim speed and centripetal load at ω = 261.7994 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm2.618 m/s · 9.425 km/h685.4 m/s² · 69.89 g
5 cm10 cm13.09 m/s · 47.12 km/h3,427 m/s² · 349.5 g
10 cm20 cm26.18 m/s · 94.25 km/h6,854 m/s² · 698.9 g
25 cm50 cm65.45 m/s · 235.6 km/h17,130 m/s² · 1,747 g
50 cm1 m130.9 m/s · 471.2 km/h34,270 m/s² · 3,495 g
1 m2 m261.8 m/s · 942.5 km/h68,540 m/s² · 6,989 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 2,500 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
241.67 HzReachable with a VFD
483.33 HzReachable with a VFD
6125 HzAbove typical VFD range
8166.7 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1833.3 RPM · 87.27 rad/s×3
5:1500 RPM · 52.36 rad/s×5
10:1250 RPM · 26.18 rad/s×10
30:183.33 RPM · 8.727 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)34.27 J
0.01 kg·m² (bench-grinder wheel)342.7 J
0.1 kg·m² (car flywheel)3.427 kJ
1 kg·m² (industrial flywheel)34.27 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions