RPM to Radians Per SecondRPM to rad/s

2,400 RPM to Radians Per Second Converter

Instant conversion for 2,400 RPM to rad/s (251.327412 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result251.327412 rad/s
Radians per Second (rad/s)
251.32741
Degrees per Second (°/s)
14,400 °/s
Hertz (Hz)
40 Hz
Revolutions per Second (RPS)
40 rev/s
Revolutions per Hour (RPH)
144,000 rev/hr
Revolutions per Day
3,456,000 rev/day
Radians per Minute (rad/min)
15,079.645 rad/min
Milliradians per Second (mrad/s)
251,327.41 mrad/s
Period (seconds per rev)
0.025 s/rev
Exact Formula
2400 × π/30 = 251.32741 rad/s
Nearest Real-World Example
Car engine — highway (2,500 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):251.327412 rad/s
Rounded (0.10472):251.328000 rad/s
Angular Error / Hour:121.22° / hr

Worked Conversion: 2,400 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 2400 × (π / 30) = 251.327412 rad/s

Exact fraction: 2400π/30 rad/s · Reciprocal: 251.33 rad/s × (30/π) = 2,400 RPM

Angular Velocity
251.327412 rad/s
Frequency
40 Hz
Degrees / Second
14,400 °/s
Period per Rev
0.025 s
Engineering Context: One to two-and-a-half thousand RPM is the industrial motor and cruising-engine band, so nameplate speeds and gearbox ratios cluster here.

Reverse Conversion: 251.33 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

2,400 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

2,400 RPM = 80π rad/s ≈ 251.327412 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 251.28 rad/s instead of the exact 251.3274 rad/s — an error of 0.04741 rad/s.

What this speed looks like in practice

At 2,400 RPM a shaft turns about 1.33× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 2.25× faster.

Revolutions over time

That is 144,000 revolutions per hour and 3,456,000 per day. A quarter turn (90°) takes 6.25 ms, and the shaft sweeps 14.4° every millisecond.

Rim speed and centripetal load at ω = 251.3274 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm2.513 m/s · 9.048 km/h631.7 m/s² · 64.41 g
5 cm10 cm12.57 m/s · 45.24 km/h3,158 m/s² · 322.1 g
10 cm20 cm25.13 m/s · 90.48 km/h6,317 m/s² · 644.1 g
25 cm50 cm62.83 m/s · 226.2 km/h15,790 m/s² · 1,610 g
50 cm1 m125.7 m/s · 452.4 km/h31,580 m/s² · 3,221 g
1 m2 m251.3 m/s · 904.8 km/h63,170 m/s² · 6,441 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 2,400 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
240 HzReachable with a VFD
480 HzReachable with a VFD
6120 HzReachable with a VFD
8160 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1800 RPM · 83.78 rad/s×3
5:1480 RPM · 50.27 rad/s×5
10:1240 RPM · 25.13 rad/s×10
30:180 RPM · 8.378 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)31.58 J
0.01 kg·m² (bench-grinder wheel)315.8 J
0.1 kg·m² (car flywheel)3.158 kJ
1 kg·m² (industrial flywheel)31.58 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions