RPM to Radians Per SecondRPM to rad/s

3,200 RPM to Radians Per Second Converter

Instant conversion for 3,200 RPM to rad/s (335.103216 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result335.103216 rad/s
Radians per Second (rad/s)
335.10322
Degrees per Second (°/s)
19,200 °/s
Hertz (Hz)
53.333333 Hz
Revolutions per Second (RPS)
53.333333 rev/s
Revolutions per Hour (RPH)
192,000 rev/hr
Revolutions per Day
4,608,000 rev/day
Radians per Minute (rad/min)
20,106.193 rad/min
Milliradians per Second (mrad/s)
335,103.22 mrad/s
Period (seconds per rev)
0.01875 s/rev
Exact Formula
3200 × π/30 = 335.10322 rad/s
Nearest Real-World Example
Car engine — highway (2,500 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):335.103216 rad/s
Rounded (0.10472):335.104000 rad/s
Angular Error / Hour:161.63° / hr

Worked Conversion: 3,200 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 3200 × (π / 30) = 335.103216 rad/s

Exact fraction: 3200π/30 rad/s · Reciprocal: 335.1 rad/s × (30/π) = 3,200 RPM

Angular Velocity
335.103216 rad/s
Frequency
53.3333 Hz
Degrees / Second
19,200 °/s
Period per Rev
0.0187 s
Engineering Context: Several thousand RPM is power-tool and high-revving-engine territory, where balance and bearing life become the binding constraints.

Reverse Conversion: 335.1 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

3,200 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

3,200 RPM = 320π/3 rad/s ≈ 335.103216 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 335.04 rad/s instead of the exact 335.1032 rad/s — an error of 0.06322 rad/s.

What this speed looks like in practice

At 3,200 RPM a shaft turns about 1.78× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.69× faster.

Revolutions over time

That is 192,000 revolutions per hour and 4,608,000 per day. A quarter turn (90°) takes 4.69 ms, and the shaft sweeps 19.2° every millisecond.

Rim speed and centripetal load at ω = 335.1032 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm3.351 m/s · 12.06 km/h1,123 m/s² · 114.5 g
5 cm10 cm16.76 m/s · 60.32 km/h5,615 m/s² · 572.5 g
10 cm20 cm33.51 m/s · 120.6 km/h11,230 m/s² · 1,145 g
25 cm50 cm83.78 m/s · 301.6 km/h28,070 m/s² · 2,863 g
50 cm1 m167.6 m/s · 603.2 km/h56,150 m/s² · 5,725 g
1 m2 m335.1 m/s · 1,206 km/h112,300 m/s² · 11,450 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 3,200 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
253.33 HzReachable with a VFD
4106.7 HzReachable with a VFD
6160 HzAbove typical VFD range
8213.3 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:11,067 RPM · 111.7 rad/s×3
5:1640 RPM · 67.02 rad/s×5
10:1320 RPM · 33.51 rad/s×10
30:1106.7 RPM · 11.17 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)56.15 J
0.01 kg·m² (bench-grinder wheel)561.5 J
0.1 kg·m² (car flywheel)5.615 kJ
1 kg·m² (industrial flywheel)56.15 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions