RPM to Radians Per SecondRPM to rad/s

3 Rad/s to RPM Converter

Instant conversion for 3 rad/s to RPM (28.6479 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result28.64789 RPM
RPM
28.64789
Degrees per Second (°/s)
171.88734 °/s
Hertz (Hz)
0.477465 Hz
Revolutions per Second (RPS)
0.477465 rev/s
Revolutions per Hour (RPH)
1,718.8734 rev/hr
Revolutions per Day
41,252.961 rev/day
Radians per Minute (rad/min)
180 rad/min
Milliradians per Second (mrad/s)
3,000 mrad/s
Period (seconds per rev)
2.094395 s/rev
Exact Formula
3 × 30/π = 28.64789 RPM
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):3.000000 rad/s
Rounded (0.10472):3.000007 rad/s
Angular Error / Hour:1.45° / hr

Worked Conversion: 3 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 3 × (30 / π) = 28.6479 RPM

Exact fraction: (3 × 30)/π RPM · Reciprocal: 28.648 RPM × (π/30) = 3 rad/s

Rotational Speed
28.6479 RPM
Frequency
0.4775 Hz
Degrees / Second
171.89 °/s
Period per Rev
2.0944 s
Engineering Context: At 3 rad/s (slow rotational speed (28.648 RPM)), At 3 rad/s, the shaft rotates at approximately 28.648 RPM with a period of 2.09 seconds per revolution, typical of slow tracking actuators.

Forward Conversion: 29 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 29 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

3 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

3 rad/s = 90/π RPM ≈ 28.64789 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 28.65 RPM instead of the exact 28.6479 RPM — an error of 0.00211 RPM.

What this speed looks like in practice

At 28.6479 RPM a shaft turns about 1.91× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.16× faster.

Revolutions over time

That is 1,718.9 revolutions per hour and 41,253 per day. A quarter turn (90°) takes 524 ms, and the shaft sweeps 0.1719° every millisecond.

Rim speed and centripetal load at ω = 3 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.03 m/s · 0.108 km/h0.09 m/s² · 0.009177 g
5 cm10 cm0.15 m/s · 0.54 km/h0.45 m/s² · 0.04589 g
10 cm20 cm0.3 m/s · 1.08 km/h0.9 m/s² · 0.09177 g
25 cm50 cm0.75 m/s · 2.7 km/h2.25 m/s² · 0.2294 g
50 cm1 m1.5 m/s · 5.4 km/h4.5 m/s² · 0.4589 g
1 m2 m3 m/s · 10.8 km/h9 m/s² · 0.9177 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 28.65 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.4775 HzBelow typical VFD range — use a gearbox
40.9549 HzBelow typical VFD range — use a gearbox
61.432 HzBelow typical VFD range — use a gearbox
81.91 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:19.549 RPM · 1 rad/s×3
5:15.73 RPM · 0.6 rad/s×5
10:12.865 RPM · 0.3 rad/s×10
30:10.9549 RPM · 0.1 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.0045 J
0.01 kg·m² (bench-grinder wheel)0.045 J
0.1 kg·m² (car flywheel)0.45 J
1 kg·m² (industrial flywheel)4.5 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions