RPM to Radians Per SecondRPM to rad/s

79 RPM to Radians Per Second Converter

Instant conversion for 79 RPM to rad/s (8.272861 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result8.272861 rad/s
Radians per Second (rad/s)
8.2728607
Degrees per Second (°/s)
474 °/s
Hertz (Hz)
1.316667 Hz
Revolutions per Second (RPS)
1.316667 rev/s
Revolutions per Hour (RPH)
4,740 rev/hr
Revolutions per Day
113,760 rev/day
Radians per Minute (rad/min)
496.37164 rad/min
Milliradians per Second (mrad/s)
8,272.8607 mrad/s
Period (seconds per rev)
0.759494 s/rev
Exact Formula
79 × π/30 = 8.2728607 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):8.272861 rad/s
Rounded (0.10472):8.272880 rad/s
Angular Error / Hour:3.99° / hr

Worked Conversion: 79 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 79 × (π / 30) = 8.272861 rad/s

Exact fraction: 79π/30 rad/s · Reciprocal: 8.273 rad/s × (30/π) = 79 RPM

Angular Velocity
8.272861 rad/s
Frequency
1.3167 Hz
Degrees / Second
474 °/s
Period per Rev
0.7595 s
Engineering Context: Under 100 RPM you are around one revolution per second, the range of bicycle wheels at low speed, slow ceiling fans and hand-cranked machinery.

Reverse Conversion: 8.273 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

79 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

79 RPM = 79π/30 rad/s ≈ 8.272861 rad/s

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 8.2713 rad/s instead of the exact 8.2729 rad/s — an error of 0.001561 rad/s.

What this speed looks like in practice

At 79 RPM a shaft turns about 1.76× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.53× faster.

Revolutions over time

That is 4,740 revolutions per hour and 113,760 per day. A quarter turn (90°) takes 190 ms, and the shaft sweeps 0.474° every millisecond.

Rim speed and centripetal load at ω = 8.2729 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.08273 m/s · 0.2978 km/h0.6844 m/s² · 0.06979 g
5 cm10 cm0.4136 m/s · 1.489 km/h3.422 m/s² · 0.3489 g
10 cm20 cm0.8273 m/s · 2.978 km/h6.844 m/s² · 0.6979 g
25 cm50 cm2.068 m/s · 7.446 km/h17.11 m/s² · 1.745 g
50 cm1 m4.136 m/s · 14.89 km/h34.22 m/s² · 3.489 g
1 m2 m8.273 m/s · 29.78 km/h68.44 m/s² · 6.979 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 79 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.317 HzBelow typical VFD range — use a gearbox
42.633 HzBelow typical VFD range — use a gearbox
63.95 HzBelow typical VFD range — use a gearbox
85.267 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:126.33 RPM · 2.758 rad/s×3
5:115.8 RPM · 1.655 rad/s×5
10:17.9 RPM · 0.8273 rad/s×10
30:12.633 RPM · 0.2758 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.03422 J
0.01 kg·m² (bench-grinder wheel)0.3422 J
0.1 kg·m² (car flywheel)3.422 J
1 kg·m² (industrial flywheel)34.22 J

Multiples of this speed

  • 0.5× = 39.5 RPM4.1364 rad/s
  • 2× = 158 RPM16.5457 rad/s
  • 5× = 395 RPM41.3643 rad/s
  • 10× = 790 RPM82.7286 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions