RPM to Radians Per SecondRPM to rad/s

77 RPM to Radians Per Second Converter

Instant conversion for 77 RPM to rad/s (8.063421 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result8.063421 rad/s
Radians per Second (rad/s)
8.0634211
Degrees per Second (°/s)
462 °/s
Hertz (Hz)
1.283333 Hz
Revolutions per Second (RPS)
1.283333 rev/s
Revolutions per Hour (RPH)
4,620 rev/hr
Revolutions per Day
110,880 rev/day
Radians per Minute (rad/min)
483.80527 rad/min
Milliradians per Second (mrad/s)
8,063.4211 mrad/s
Period (seconds per rev)
0.779221 s/rev
Exact Formula
77 × π/30 = 8.0634211 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):8.063421 rad/s
Rounded (0.10472):8.063440 rad/s
Angular Error / Hour:3.89° / hr

Worked Conversion: 77 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 77 × (π / 30) = 8.063421 rad/s

Exact fraction: 77π/30 rad/s · Reciprocal: 8.063 rad/s × (30/π) = 77 RPM

Angular Velocity
8.063421 rad/s
Frequency
1.2833 Hz
Degrees / Second
462 °/s
Period per Rev
0.7792 s
Engineering Context: Under 100 RPM you are around one revolution per second, the range of bicycle wheels at low speed, slow ceiling fans and hand-cranked machinery.

Reverse Conversion: 8.063 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

77 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

77 RPM = 77π/30 rad/s ≈ 8.063421 rad/s

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 8.0619 rad/s instead of the exact 8.0634 rad/s — an error of 0.001521 rad/s.

What this speed looks like in practice

At 77 RPM a shaft turns about 1.71× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.6× faster.

Revolutions over time

That is 4,620 revolutions per hour and 110,880 per day. A quarter turn (90°) takes 195 ms, and the shaft sweeps 0.462° every millisecond.

Rim speed and centripetal load at ω = 8.0634 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.08063 m/s · 0.2903 km/h0.6502 m/s² · 0.0663 g
5 cm10 cm0.4032 m/s · 1.451 km/h3.251 m/s² · 0.3315 g
10 cm20 cm0.8063 m/s · 2.903 km/h6.502 m/s² · 0.663 g
25 cm50 cm2.016 m/s · 7.257 km/h16.25 m/s² · 1.658 g
50 cm1 m4.032 m/s · 14.51 km/h32.51 m/s² · 3.315 g
1 m2 m8.063 m/s · 29.03 km/h65.02 m/s² · 6.63 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 77 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.283 HzBelow typical VFD range — use a gearbox
42.567 HzBelow typical VFD range — use a gearbox
63.85 HzBelow typical VFD range — use a gearbox
85.133 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:125.67 RPM · 2.688 rad/s×3
5:115.4 RPM · 1.613 rad/s×5
10:17.7 RPM · 0.8063 rad/s×10
30:12.567 RPM · 0.2688 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.03251 J
0.01 kg·m² (bench-grinder wheel)0.3251 J
0.1 kg·m² (car flywheel)3.251 J
1 kg·m² (industrial flywheel)32.51 J

Multiples of this speed

  • 0.5× = 38.5 RPM4.0317 rad/s
  • 2× = 154 RPM16.1268 rad/s
  • 5× = 385 RPM40.3171 rad/s
  • 10× = 770 RPM80.6342 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions