RPM to Radians Per SecondRPM to rad/s

97 RPM to Radians Per Second Converter

Instant conversion for 97 RPM to rad/s (10.157816 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result10.157816 rad/s
Radians per Second (rad/s)
10.157816
Degrees per Second (°/s)
582 °/s
Hertz (Hz)
1.616667 Hz
Revolutions per Second (RPS)
1.616667 rev/s
Revolutions per Hour (RPH)
5,820 rev/hr
Revolutions per Day
139,680 rev/day
Radians per Minute (rad/min)
609.46897 rad/min
Milliradians per Second (mrad/s)
10,157.816 mrad/s
Period (seconds per rev)
0.618557 s/rev
Exact Formula
97 × π/30 = 10.157816 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):10.157816 rad/s
Rounded (0.10472):10.157840 rad/s
Angular Error / Hour:4.90° / hr

Worked Conversion: 97 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 97 × (π / 30) = 10.157816 rad/s

Exact fraction: 97π/30 rad/s · Reciprocal: 10.158 rad/s × (30/π) = 97 RPM

Angular Velocity
10.157816 rad/s
Frequency
1.6167 Hz
Degrees / Second
582 °/s
Period per Rev
0.6186 s
Engineering Context: Under 100 RPM you are around one revolution per second, the range of bicycle wheels at low speed, slow ceiling fans and hand-cranked machinery.

Reverse Conversion: 10.158 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

97 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

97 RPM = 97π/30 rad/s ≈ 10.157816 rad/s

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 10.1559 rad/s instead of the exact 10.1578 rad/s — an error of 0.001916 rad/s.

What this speed looks like in practice

At 97 RPM a shaft turns about 2.16× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.06× faster.

Revolutions over time

That is 5,820 revolutions per hour and 139,680 per day. A quarter turn (90°) takes 155 ms, and the shaft sweeps 0.582° every millisecond.

Rim speed and centripetal load at ω = 10.1578 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.1016 m/s · 0.3657 km/h1.032 m/s² · 0.1052 g
5 cm10 cm0.5079 m/s · 1.828 km/h5.159 m/s² · 0.5261 g
10 cm20 cm1.016 m/s · 3.657 km/h10.32 m/s² · 1.052 g
25 cm50 cm2.539 m/s · 9.142 km/h25.8 m/s² · 2.63 g
50 cm1 m5.079 m/s · 18.28 km/h51.59 m/s² · 5.261 g
1 m2 m10.16 m/s · 36.57 km/h103.2 m/s² · 10.52 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 97 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.617 HzBelow typical VFD range — use a gearbox
43.233 HzBelow typical VFD range — use a gearbox
64.85 HzBelow typical VFD range — use a gearbox
86.467 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:132.33 RPM · 3.386 rad/s×3
5:119.4 RPM · 2.032 rad/s×5
10:19.7 RPM · 1.016 rad/s×10
30:13.233 RPM · 0.3386 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.05159 J
0.01 kg·m² (bench-grinder wheel)0.5159 J
0.1 kg·m² (car flywheel)5.159 J
1 kg·m² (industrial flywheel)51.59 J

Multiples of this speed

  • 0.5× = 48.5 RPM5.0789 rad/s
  • 2× = 194 RPM20.3156 rad/s
  • 5× = 485 RPM50.7891 rad/s
  • 10× = 970 RPM101.5782 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions