94 RPM to Radians Per Second Converter
Instant conversion for 94 RPM to rad/s (9.843657 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 9.843657
- Degrees per Second (°/s)
- 564 °/s
- Hertz (Hz)
- 1.566667 Hz
- Revolutions per Second (RPS)
- 1.566667 rev/s
- Revolutions per Hour (RPH)
- 5,640 rev/hr
- Revolutions per Day
- 135,360 rev/day
- Radians per Minute (rad/min)
- 590.61942 rad/min
- Milliradians per Second (mrad/s)
- 9,843.657 mrad/s
- Period (seconds per rev)
- 0.638298 s/rev
- Exact Formula
- 94 × π/30 = 9.843657 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 94 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 94 × (π / 30) = 9.843657 rad/s
Exact fraction: 94π/30 rad/s · Reciprocal: 9.844 rad/s × (30/π) = 94 RPM
Reverse Conversion: 9.844 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
94 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
94 RPM = 47π/15 rad/s ≈ 9.843657 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 9.8418 rad/s instead of the exact 9.8437 rad/s — an error of 0.001857 rad/s.
What this speed looks like in practice
At 94 RPM a shaft turns about 2.09× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.13× faster.
Revolutions over time
That is 5,640 revolutions per hour and 135,360 per day. A quarter turn (90°) takes 160 ms, and the shaft sweeps 0.564° every millisecond.
Rim speed and centripetal load at ω = 9.8437 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.09844 m/s · 0.3544 km/h | 0.969 m/s² · 0.09881 g |
| 5 cm | 10 cm | 0.4922 m/s · 1.772 km/h | 4.845 m/s² · 0.494 g |
| 10 cm | 20 cm | 0.9844 m/s · 3.544 km/h | 9.69 m/s² · 0.9881 g |
| 25 cm | 50 cm | 2.461 m/s · 8.859 km/h | 24.22 m/s² · 2.47 g |
| 50 cm | 1 m | 4.922 m/s · 17.72 km/h | 48.45 m/s² · 4.94 g |
| 1 m | 2 m | 9.844 m/s · 35.44 km/h | 96.9 m/s² · 9.881 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 94 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.567 Hz | Below typical VFD range — use a gearbox |
| 4 | 3.133 Hz | Below typical VFD range — use a gearbox |
| 6 | 4.7 Hz | Below typical VFD range — use a gearbox |
| 8 | 6.267 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 31.33 RPM · 3.281 rad/s | ×3 |
| 5:1 | 18.8 RPM · 1.969 rad/s | ×5 |
| 10:1 | 9.4 RPM · 0.9844 rad/s | ×10 |
| 30:1 | 3.133 RPM · 0.3281 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.04845 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.4845 J |
| 0.1 kg·m² (car flywheel) | 4.845 J |
| 1 kg·m² (industrial flywheel) | 48.45 J |
Multiples of this speed
- 0.5× = 47 RPM4.9218 rad/s
- 2× = 188 RPM19.6873 rad/s
- 5× = 470 RPM49.2183 rad/s
- 10× = 940 RPM98.4366 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 94 RPM to radians per second, multiply 94 by π and divide by 30: 94 × (π / 30) = 9.843657 rad/s (approx. 9.844 rad/s).
94 RPM equals 1.5667 Hz (revolutions per second), calculated by dividing 94 by 60 seconds.
To convert 9.844 rad/s back to RPM, multiply by 30 and divide by π: 9.844 × (30 / π) ≈ 94 RPM.
At 94 RPM, one full 360° revolution takes 0.6383 seconds (638.30 ms).
A 4-pole induction motor has a synchronous speed of 94 RPM at 3.1333 Hz (f = RPM × poles / 120 = 94 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 9.843657 rad/s × 0.1 m = 0.9844 m/s (3.5437 km/h). The centripetal acceleration at the rim is ω²·r = 9.6898 m/s².