11,000 RPM to Radians Per Second Converter
Instant conversion for 11,000 RPM to rad/s (1151.917306 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 1151.9173
- Degrees per Second (°/s)
- 66,000 °/s
- Hertz (Hz)
- 183.33333 Hz
- Revolutions per Second (RPS)
- 183.33333 rev/s
- Revolutions per Hour (RPH)
- 660,000 rev/hr
- Revolutions per Day
- 15,840,000 rev/day
- Radians per Minute (rad/min)
- 69,115.038 rad/min
- Milliradians per Second (mrad/s)
- 1,151,917.3 mrad/s
- Period (seconds per rev)
- 0.005455 s/rev
- Exact Formula
- 11000 × π/30 = 1151.9173 rad/s
- Nearest Real-World Example
- Angle grinder (11,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 11,000 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 11000 × (π / 30) = 1151.917306 rad/s
Exact fraction: 11000π/30 rad/s · Reciprocal: 1151.9 rad/s × (30/π) = 11,000 RPM
Reverse Conversion: 1151.9 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
11,000 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
11,000 RPM = 1,100π/3 rad/s ≈ 1,151.917306 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 1,151.7 rad/s instead of the exact 1,151.9173 rad/s — an error of 0.2173 rad/s.
What this speed looks like in practice
That is the typical speed of a 115 mm angle grinder. At 11,000 RPM a shaft turns about 1.53× as fast as a desktop hard drive (7,200 RPM). A rotary multi-tool at full speed turns about 3.18× faster.
Revolutions over time
That is 660,000 revolutions per hour and 15,840,000 per day. A quarter turn (90°) takes 1.36 ms, and the shaft sweeps 66° every millisecond.
Rim speed and centripetal load at ω = 1,151.9173 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 11.52 m/s · 41.47 km/h | 13,270 m/s² · 1,353 g |
| 5 cm | 10 cm | 57.6 m/s · 207.3 km/h | 66,350 m/s² · 6,765 g |
| 10 cm | 20 cm | 115.2 m/s · 414.7 km/h | 132,700 m/s² · 13,530 g |
| 25 cm | 50 cm | 288 m/s · 1,037 km/h | 331,700 m/s² · 33,830 g |
| 50 cm | 1 m | 576 m/s · 2,073 km/h | 663,500 m/s² · 67,650 g |
| 1 m | 2 m | 1,152 m/s · 4,147 km/h | 1,327,000 m/s² · 135,300 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 11,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 183.3 Hz | Above typical VFD range |
| 4 | 366.7 Hz | Above typical VFD range |
| 6 | 550 Hz | Above typical VFD range |
| 8 | 733.3 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 3,667 RPM · 384 rad/s | ×3 |
| 5:1 | 2,200 RPM · 230.4 rad/s | ×5 |
| 10:1 | 1,100 RPM · 115.2 rad/s | ×10 |
| 30:1 | 366.7 RPM · 38.4 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 663.5 J |
| 0.01 kg·m² (bench-grinder wheel) | 6.635 kJ |
| 0.1 kg·m² (car flywheel) | 66.35 kJ |
| 1 kg·m² (industrial flywheel) | 663.5 kJ |
Multiples of this speed
- 0.5× = 5,500 RPM575.9587 rad/s
- 2× = 22,000 RPM2,303.8346 rad/s
- 5× = 55,000 RPM5,759.5865 rad/s
- 10× = 110,000 RPM11,519.1731 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 11,000 RPM to radians per second, multiply 11000 by π and divide by 30: 11000 × (π / 30) = 1151.917306 rad/s (approx. 1151.9 rad/s).
11,000 RPM equals 183.3333 Hz (revolutions per second), calculated by dividing 11000 by 60 seconds.
To convert 1151.9 rad/s back to RPM, multiply by 30 and divide by π: 1151.9 × (30 / π) ≈ 11,000 RPM.
At 11,000 RPM, one full 360° revolution takes 0.0055 seconds (5.45 ms).
A 4-pole induction motor has a synchronous speed of 11,000 RPM at 366.6667 Hz (f = RPM × poles / 120 = 11000 × 4 / 120). That is beyond a standard motor and drive, so this speed calls for a high-speed spindle motor or a step-up transmission.
Tangential speed is v = ω·r = 1151.917306 rad/s × 0.1 m = 115.1917 m/s (414.6902 km/h). The centripetal acceleration at the rim is ω²·r = 132691.3481 m/s².