1 RPM to Radians Per Second Converter
Instant conversion for 1 RPM to rad/s (0.104720 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 0.10471976
- Degrees per Second (°/s)
- 6 °/s
- Hertz (Hz)
- 0.016667 Hz
- Revolutions per Second (RPS)
- 0.016667 rev/s
- Revolutions per Hour (RPH)
- 60 rev/hr
- Revolutions per Day
- 1,440 rev/day
- Radians per Minute (rad/min)
- 6.283185 rad/min
- Milliradians per Second (mrad/s)
- 104.71976 mrad/s
- Period (seconds per rev)
- 60 s/rev
- Exact Formula
- 1 × π/30 = 0.10471976 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 1 × (π / 30) = 0.104720 rad/s
Exact fraction: 1π/30 rad/s · Reciprocal: 0.1047 rad/s × (30/π) = 1 RPM
Reverse Conversion: 0.1047 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
1 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
1 RPM = π/30 rad/s ≈ 0.10472 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 0.1047 rad/s instead of the exact 0.1047 rad/s — an error of 0.00001976 rad/s.
What this speed looks like in practice
That is the typical speed of a clock's second hand. At 1 RPM a shaft turns about 1,440× as fast as the Earth's rotation. A utility-scale wind turbine rotor turns about 15× faster.
Revolutions over time
That is 60 revolutions per hour and 1,440 per day. A quarter turn (90°) takes 15 s, and the shaft sweeps 0.006° every millisecond.
Rim speed and centripetal load at ω = 0.1047 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.001047 m/s · 0.00377 km/h | 0.0001097 m/s² · 0.00001118 g |
| 5 cm | 10 cm | 0.005236 m/s · 0.01885 km/h | 0.0005483 m/s² · 0.00005591 g |
| 10 cm | 20 cm | 0.01047 m/s · 0.0377 km/h | 0.001097 m/s² · 0.0001118 g |
| 25 cm | 50 cm | 0.02618 m/s · 0.09425 km/h | 0.002742 m/s² · 0.0002796 g |
| 50 cm | 1 m | 0.05236 m/s · 0.1885 km/h | 0.005483 m/s² · 0.0005591 g |
| 1 m | 2 m | 0.1047 m/s · 0.377 km/h | 0.01097 m/s² · 0.001118 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.01667 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.03333 Hz | Below typical VFD range — use a gearbox |
| 6 | 0.05 Hz | Below typical VFD range — use a gearbox |
| 8 | 0.06667 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 0.3333 RPM · 0.03491 rad/s | ×3 |
| 5:1 | 0.2 RPM · 0.02094 rad/s | ×5 |
| 10:1 | 0.1 RPM · 0.01047 rad/s | ×10 |
| 30:1 | 0.03333 RPM · 0.003491 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.000005483 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.00005483 J |
| 0.1 kg·m² (car flywheel) | 0.0005483 J |
| 1 kg·m² (industrial flywheel) | 0.005483 J |
Multiples of this speed
- 0.5× = 0.5 RPM0.0524 rad/s
- 2× = 2 RPM0.2094 rad/s
- 5× = 5 RPM0.5236 rad/s
- 10× = 10 RPM1.0472 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1 RPM to radians per second, multiply 1 by π and divide by 30: 1 × (π / 30) = 0.104720 rad/s (approx. 0.1047 rad/s).
1 RPM equals 0.0167 Hz (revolutions per second), calculated by dividing 1 by 60 seconds.
To convert 0.1047 rad/s back to RPM, multiply by 30 and divide by π: 0.1047 × (30 / π) ≈ 1 RPM.
At 1 RPM, one full 360° revolution takes 60 seconds (60000.00 ms).
A 4-pole induction motor has a synchronous speed of 1 RPM at 0.0333 Hz (f = RPM × poles / 120 = 1 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 0.104720 rad/s × 0.1 m = 0.0105 m/s (0.0377 km/h). The centripetal acceleration at the rim is ω²·r = 0.0011 m/s².